greenhouse

Characteristics of polycarbonate greenhouse Harvest PC

The depth of this material is 4 mm.

If you want, you can raise the duration of the construction to 6 yards or longer. To do this, it is sufficient to join a two-meter expansion. When choosing a drawing, then pay attention to the distance between the arches. This figure needs to be 65 cm, which is the most appropriate duration for the specified thickness of this material. The width of the doors in line with the maker’s drawing is 90 cm.

Before assembling a polycarbonate greenhouse, it is necessary to choose a spot for its place. If this is done properly, you can provide yourself with a crop of fresh vegetables for the whole calendar year.

The place for the future greenhouse is marked immediately in the preparation of their garden plot. So as to melt the snow at the location of the greenhouse as soon as possible, gidpostroy.ru the ideal point on the website will be a small elevation. Moreover, in such a place is not going to have to worry about significant humidity as soil and air inside the building.

Build a polycarbonate greenhouse on a raised site — intends to look after the best temperature inside.

When it is not feasible to place a greenhouse on an elevated position, you’ll need to pour a coating of fine shattered rock around 20 cm and the exact same layer of fertile land to make seedbeds.

Before assembling a greenhouse on your backyard plot, you should also think about where and how this construction will be set up. To begin with, you have to pick a place for this. The greenhouse ought to be located at a metropolitan region no less than a couple meters away from homes, barns and other structures.

The best way to Put in a greenhouse according to the Faces of the world

Make sure you measure the dirt surface — it is ideal to remove the top layer. This will also get rid of weed seeds. And for ease of work, remove the soil in a place that’s around a meter wider on all sides of the rectangle that you desire.

In addition, it is worth thinking about having a foundation. As manufacturers state, today most greenhouses do not need it, particularly if they (greenhouses) are utilized only in the summer and spring time. But, seasoned anglers still recommend earning a basic foundation from a pub. It’s quite simple — it is enough to link with each other utilizing metal corners and screws four pieces of timber with a cross-section of at least 10 * 10 cm. The size of such a foundation ought to be equivalent to the foundation of the upcoming greenhouse.

Simple bar foundation

You might also earn a strip base of concrete. He is more dependable than a pub base, but requires greater financial and labour costs. Incidentally, the rainwater, that will be utilised in the winter, with no and do not do with it at all.

Stages of the formation of a strip base: a schematic representation

Many producers counsel to set up greenhouse structures without even building a base. Even for this intention, they equip the framework with specific T-shaped legs, so that the construction was firmly fixed. However, as practice shows, it is still required to build a base: so and the basis will be more firmly fixed and the components of the basis in contact with the soil, will be stored much longer in its initial condition.

The most important issue is to deal with the material with special agents to protect the timber from moisture. The substance is installed on concrete blocks that are dug into the ground. For a six-meter structure, they want 10 pieces: four on each side and one in the middle of the endings.

Before you do the greenhouse , you have to select the best location for it. It has to be an even website, so the framework was located equally, without distortions. It needs to be bright and not obscured by buildings or trees.

18 марта, 2021 / / в